Wiring for dual horns

Moderator: FORDification

Post Reply
Ohiotinkerer
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 852
Joined: Wed Nov 09, 2016 5:49 pm
Location: Galion, Ohio

Wiring for dual horns

Post by Ohiotinkerer »

WTB the yellow wire with connectors for dual horns - can be cut below the passenger side horn as long as there's plenty to splice with.
"Life is a garden - dig it"........... :thup:

1968 F100 2wd - Rangoon Red - 360 w/T18 - power steering and brakes
1997 Honda CBR 900RR
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: Wiring for dual horns

Post by basketcase0302 »

="Ohiotinkerer"]WTB the yellow wire with connectors for dual horns - can be cut below the passenger side horn as long as there's plenty to splice with.
Try these guys for the terminal ends then just buy the wire and make it easily enough. :wink:

http://www.wiringproducts.com/ford-connectors-sockets
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
Post Reply