1967 F-100 project

Post progress reports on your project truck(s)

Moderator: FORDification

Post Reply
User avatar
hfdco4
Blue Oval Guru
Blue Oval Guru
Posts: 1287
Joined: Mon Apr 01, 2013 1:45 pm

Re: 1967 F-100 project

Post by hfdco4 »

Great score. :thup:
Paul
:fr: FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
Dylan68
New Member
New Member
Posts: 8
Joined: Tue Feb 27, 2018 6:27 am

Re: 1967 F-100 project

Post by Dylan68 »

67nukeford wrote:Weather held out long enough for me to get some POR-15 on the cowl and floor. Plan on shooting epoxy over it, and I'll probably puff can some black paint over the cowl section, before I weld it back together.

Great job on the depth of this restore! I plan on doing the same here shortly.
Dylan68
New Member
New Member
Posts: 8
Joined: Tue Feb 27, 2018 6:27 am

Re: 1967 F-100 project

Post by Dylan68 »

Great work so far on the build. Your attention to detail is amazing and it will pay dividends for years to come after the project is complete.
C7TZ
New Member
New Member
Posts: 15
Joined: Tue Apr 08, 2014 1:56 am

Re: 1967 F-100 project

Post by C7TZ »

Great write up, what fuel tank are you using?
User avatar
Manny
Blue Oval Guru
Blue Oval Guru
Posts: 1190
Joined: Wed Oct 04, 2006 7:15 pm
Location: Georgia, Lake City
Contact:

Re: 1967 F-100 project

Post by Manny »

You know i watched this one a while back like a hawk. I failed in not keeping up. Very impressive work on the cab and body and paint. Truly a better cab than for ever built!!! Looking forward to more!!! :thup:
Just another Ford fool named Dan.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
woods wrote: The rust holes in my truck were a factory install (very rare).
Busboy
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 943
Joined: Sat Jan 24, 2015 9:51 am
Location: Nampa Idaho

Re: 1967 F-100 project

Post by Busboy »

67nukeford wrote:Thanks, starting to look like a truck again! Hood parts coming together. Lets start with the pretties....Hood hinges plated in zinc. Only 25 a piece to get these plated.
Those hinges look awesome, where did you get them done?
1967 F-100 4x4 custom cab.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: 1967 F-100 project

Post by basketcase0302 »

Looking sweet! :pop:
Love how the hood results of stripping / the plating / and the cargo lamp switch (very nice "finishing touch"). :thup:
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
User avatar
67nukeford
Blue Oval Fan
Blue Oval Fan
Posts: 589
Joined: Tue Aug 19, 2008 3:20 pm
Location: Nebraska, Omaha/Elkhorn

Re: 1967 F-100 project

Post by 67nukeford »

Man, been a while since I've updated this! So, I'll see if I can get this up to date, and stay on it!
Pat 1967 F100 4WD
LINK TO PROJECT THREAD
:http://www.fordification.com/forum/view ... &sk=t&sd=a
User avatar
hfdco4
Blue Oval Guru
Blue Oval Guru
Posts: 1287
Joined: Mon Apr 01, 2013 1:45 pm

Re: 1967 F-100 project

Post by hfdco4 »

Good to see you back.
Paul
:fr: FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
User avatar
hfdco4
Blue Oval Guru
Blue Oval Guru
Posts: 1287
Joined: Mon Apr 01, 2013 1:45 pm

Re: 1967 F-100 project

Post by hfdco4 »

So have you thawed out yet?
Paul
:fr: FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
User avatar
67nukeford
Blue Oval Fan
Blue Oval Fan
Posts: 589
Joined: Tue Aug 19, 2008 3:20 pm
Location: Nebraska, Omaha/Elkhorn

Re: 1967 F-100 project

Post by 67nukeford »

Well, so much for staying up to date on this! So, time to catch up! So, allow me to try and get caught up! Man, can't believe how far behind I am! So, box sides came off, and the box went off to sandblasting. Had to drill a bazillion spot welds, and actually cut the back of the box side off, since its spot welded internally.
You do not have the required permissions to view the files attached to this post.
Pat 1967 F100 4WD
LINK TO PROJECT THREAD
:http://www.fordification.com/forum/view ... &sk=t&sd=a
User avatar
67nukeford
Blue Oval Fan
Blue Oval Fan
Posts: 589
Joined: Tue Aug 19, 2008 3:20 pm
Location: Nebraska, Omaha/Elkhorn

Re: 1967 F-100 project

Post by 67nukeford »

This is the box, back from the sandblaster. I also sent the box sides, and, a section from my old bed, to use as patch panels, there are several sections needing patches on this box.
You do not have the required permissions to view the files attached to this post.
Pat 1967 F100 4WD
LINK TO PROJECT THREAD
:http://www.fordification.com/forum/view ... &sk=t&sd=a
User avatar
hfdco4
Blue Oval Guru
Blue Oval Guru
Posts: 1287
Joined: Mon Apr 01, 2013 1:45 pm

Re: 1967 F-100 project

Post by hfdco4 »

Wow, looks like you have been busy!
Paul
:fr: FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
User avatar
67nukeford
Blue Oval Fan
Blue Oval Fan
Posts: 589
Joined: Tue Aug 19, 2008 3:20 pm
Location: Nebraska, Omaha/Elkhorn

Re: 1967 F-100 project

Post by 67nukeford »

Yeah, and that is from 2 years ago! I've got a bit of catching up to do!
Pat 1967 F100 4WD
LINK TO PROJECT THREAD
:http://www.fordification.com/forum/view ... &sk=t&sd=a
User avatar
67nukeford
Blue Oval Fan
Blue Oval Fan
Posts: 589
Joined: Tue Aug 19, 2008 3:20 pm
Location: Nebraska, Omaha/Elkhorn

Re: 1967 F-100 project

Post by 67nukeford »

a few more pics
You do not have the required permissions to view the files attached to this post.
Pat 1967 F100 4WD
LINK TO PROJECT THREAD
:http://www.fordification.com/forum/view ... &sk=t&sd=a
Post Reply