I found a real nice '68 cab and front clip I could use on my truck. little to no rust, just surface rust and a quarter size hole near the battery tray. 1 small crease in the driver's door is the major body damage.
no rust on the core support, on the inner fenders, or the cab mounts or corners.
cab is stripped bare (like keith's) but everything is probably still around and included, except the windshield.
been stored in a garage for 3 years. this is JUST the cab and front clip.
I need a quick idea of what this might be worth! I need a cab bad, but money is definitely an object here! (I have very little )
what should I offer him?? ballpark figures, anyone??
going price for a cab & front clip??
- 72hiboy4x4
- Blue Oval Fanatic
- Posts: 978
- Joined: Sat Jan 01, 2005 8:53 pm
- Location: As far away as I can be from Wa state, without crossing the Mississippi
- Contact:
- 1970F250
- Preferred User
- Posts: 387
- Joined: Tue Aug 09, 2005 11:29 pm
- Location: California
re: going price for a cab & front clip??
i payed $250 just for the roof cut off the cab at a boneyard.so id expect to pay more than that
Steve
binder56jd wrote: If you can't dazzle them with diamonds- baffle them with b------t
- GT-Racer
- Preferred User
- Posts: 417
- Joined: Thu Jul 22, 2004 6:33 pm
- Location: West Virginia, Parkersburg
- 71Ford100
- Preferred User
- Posts: 281
- Joined: Sat Oct 02, 2004 6:03 pm
- Location: Wyoming, Burns
re: going price for a cab & front clip??
cab at a local boneyard rust free without doors 250 300 with dors
Lance Peters
'72 250 4x4 project,''71 F-100 daily driver,69 F-250 4x4 Crew, '68 F-100, '68 F-250 crew under restoration, '52 Dodge 1/2 ton overload, gazillion tractors and combines
'72 250 4x4 project,''71 F-100 daily driver,69 F-250 4x4 Crew, '68 F-100, '68 F-250 crew under restoration, '52 Dodge 1/2 ton overload, gazillion tractors and combines
- 72hiboy4x4
- Blue Oval Fanatic
- Posts: 978
- Joined: Sat Jan 01, 2005 8:53 pm
- Location: As far away as I can be from Wa state, without crossing the Mississippi
- Contact:
what if $250 IS my upper limit?? I don't want to insult the guy by offering too little, but lack of funds tie me down.Comet wrote:I'd offer $250 and start there. Pick a no. as your upper limit and stop there.
I'll talk to him tomorrow and see what he says...
thanks for the advice, guys. I'll see what he says!
- FORDification
- Site & Forum Admin
- Posts: 8049
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
re: going price for a cab & front clip??
Well, I'd imagine that he's probably not getting a lot of people beating down his door looking for those items, so you might get lucky. When I got my last parts truck I just told the seller "It's not a matter of what I think it's worth, it's what I think I can afford". If he decides to pass on your offer and then finds the parts sitting around not going anywhere, he'd be more likely to listen to your offer again. It sure doesn't hurt to ask.
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
- willowbilly3
- 100% FORDified!
- Posts: 1591
- Joined: Mon Jul 19, 2004 7:38 pm
- Location: Black Hills
re: going price for a cab & front clip??
I would politely tell him you only have $100 to spend and leave your number. If he is trying to get it out of his garage he will be calling you. There isn't anyone else that's going to come get it. People doing cab swaps on these pickups are few and far between.
Great ideas have always encounter violent opposition from mediocre minds.
- jzjames
- 100% FORDified!
- Posts: 1776
- Joined: Sun Jan 09, 2005 2:59 pm
- Location: Washington, Windy Point
re: going price for a cab & front clip??
good cab,..plus all that work youre going to have to do,...$200 max.