'69 overhaul- CV, 8.8, and more.
Moderator: FORDification
-
- New Member
- Posts: 15
- Joined: Fri Oct 20, 2017 9:31 pm
- Location: Hillsborough, NC
Re: '69 overhaul- CV, 8.8, and more.
THE QUESTION OF THE CENTURY HAS BEEN ANSWERED, Thanks Dollarbill.
This is the starting point of my build. I should have my truck bought and home in 6 weeks. Looking forward to removing the first bolt from my project, "Thunder Lord".
This is the starting point of my build. I should have my truck bought and home in 6 weeks. Looking forward to removing the first bolt from my project, "Thunder Lord".
If life hands you a lemon, squeeze it in your moonshine
-
- New Member
- Posts: 50
- Joined: Sun Aug 23, 2015 1:50 pm
- Location: North Atlanta
Re: '69 overhaul- CV, 8.8, and more.
RSharpe wrote:Just went through you post here, very impressed. I helped (got things, held parts in place, grinded) put a CV in a friend's friends truck. Didn't see finished job. I am going to do the swap myself on my 69 I'm buying soon. The questions I am asking are because I don't want the truck to cut grass. I just want a lower ride for handling.
I know the starting points, remove front end, weld in bracing and cut out cross member. Now with a bare frame, where to start? How do I measure for center line, where the CV nipples stick in the frame. With that measurement, I can drill, cut, grind and then weld.
There is another question I don't think has been asked. How much does this lower the front? I have heard 5 to 6". Dropbeams go 3". Would it be possible to put a 2" block between the CV and the frame?
You won’t be cutting any grass. In fact, I’m hoping it’s going to be low enough. As for the measuring, see the hole I circled in the pic below, that is the axle centerline. If you go 1/4” forward of that hole on the lower rail, that’s where the CV pins pop through. It’s between the other 2 holes below it. Depending on your wheel size, you can tweak it forward or back a touch to get the right look under the fender.
-Ryan
1969 F100
1969 F100
-
- New Member
- Posts: 24
- Joined: Mon Jun 04, 2012 10:41 pm
- Location: Dawson alabama
Re: '69 overhaul- CV, 8.8, and more.
My thoughts exactly on being low enuff rms... i did talk to a guy up north thats supposed to be workin on some mounts this week, guess we’ll see. I probably need to take a small break anyways and get the boat ready for some crappie!
1967 F100
-
- New Member
- Posts: 52
- Joined: Mon Jan 06, 2014 10:29 pm
Re: '69 overhaul- CV, 8.8, and more.
Great build!
-Monkey-1
1985 F-150 Build Thread (CV Swap, 4.6, Frame-Off) https://www.ford-trucks.com/forums/1519 ... 4-6-a.html
1977 F-100 Flareside Build Thread (CV Swap, 4.6, Frame-Off) https://www.ford-trucks.com/forums/1545 ... hread.html
Studmonkeyracing.com
studmonkey@bellsouth.net
1985 F-150 Build Thread (CV Swap, 4.6, Frame-Off) https://www.ford-trucks.com/forums/1519 ... 4-6-a.html
1977 F-100 Flareside Build Thread (CV Swap, 4.6, Frame-Off) https://www.ford-trucks.com/forums/1545 ... hread.html
Studmonkeyracing.com
studmonkey@bellsouth.net
- hfdco4
- Blue Oval Guru
- Posts: 1311
- Joined: Mon Apr 01, 2013 1:45 pm
Re: '69 overhaul- CV, 8.8, and more.
Looking real good. Can't wait to see the full install.
Paul
FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
-
- New Member
- Posts: 21
- Joined: Fri Apr 05, 2013 2:54 pm
Re: '69 overhaul- CV, 8.8, and more.
what size tires and wheels did you have before the tear down? thanks
-
- New Member
- Posts: 50
- Joined: Sun Aug 23, 2015 1:50 pm
- Location: North Atlanta
Re: '69 overhaul- CV, 8.8, and more.
I’m not 100%, but I believe they were 225/60/15 front and 265/60/15 rear.GOODOLEBOY84 wrote:what size tires and wheels did you have before the tear down? thanks
-Ryan
1969 F100
1969 F100
-
- New Member
- Posts: 50
- Joined: Sun Aug 23, 2015 1:50 pm
- Location: North Atlanta
Re: '69 overhaul- CV, 8.8, and more.
Finished up the C-notch and painted the back half. Also, figured a way to adapt the Explorer 8.8 e-brake to the truck. Got some Cal-tracs installed too.
Decided on the stand alone Holley Digital Dash. This is an all in one touchscreen setup; gauges, turn signals, switches, you name it. However, no EFI for me. I'll be running a carb'd 6.0 LS.
Decided on the stand alone Holley Digital Dash. This is an all in one touchscreen setup; gauges, turn signals, switches, you name it. However, no EFI for me. I'll be running a carb'd 6.0 LS.
-Ryan
1969 F100
1969 F100
-
- Preferred User
- Posts: 331
- Joined: Tue Jun 28, 2016 8:46 am
Re: '69 overhaul- CV, 8.8, and more.
Motor mounts here...
https://www.outcastautoworks.com/collec ... -150-f-250
Although, I don't understand the choice of an LS. They are cheap. I guess they have that going for them.
https://www.outcastautoworks.com/collec ... -150-f-250
Although, I don't understand the choice of an LS. They are cheap. I guess they have that going for them.
1970 F100 Ranger 2WD
project link: http://www.fordification.com/forum/view ... 22&t=83642
project link: http://www.fordification.com/forum/view ... 22&t=83642
-
- Preferred User
- Posts: 331
- Joined: Tue Jun 28, 2016 8:46 am
Re: '69 overhaul- CV, 8.8, and more.
So, what's the plan? Are you going to cut a hole in that dash and fix the touch screen to the back of it?
1970 F100 Ranger 2WD
project link: http://www.fordification.com/forum/view ... 22&t=83642
project link: http://www.fordification.com/forum/view ... 22&t=83642
-
- New Member
- Posts: 50
- Joined: Sun Aug 23, 2015 1:50 pm
- Location: North Atlanta
Re: '69 overhaul- CV, 8.8, and more.
Yes, I got those motor mounts.
As far as the mounting of the digital dash, it’s going to sit just as it is in my picture, except the wires will pass through the back so they won’t be seen.
As far as the mounting of the digital dash, it’s going to sit just as it is in my picture, except the wires will pass through the back so they won’t be seen.
-Ryan
1969 F100
1969 F100
-
- New Member
- Posts: 21
- Joined: Fri Apr 05, 2013 2:54 pm
Re: '69 overhaul- CV, 8.8, and more.
did you make that dash insert or can you buy it some where?
-
- New Member
- Posts: 50
- Joined: Sun Aug 23, 2015 1:50 pm
- Location: North Atlanta
Re: '69 overhaul- CV, 8.8, and more.
It’s from Munssey Speed and Design.GOODOLEBOY84 wrote:did you make that dash insert or can you buy it some where?
-Ryan
1969 F100
1969 F100
-
- New Member
- Posts: 25
- Joined: Wed Jul 23, 2014 2:49 pm
Re: '69 overhaul- CV, 8.8, and more.
Enjoy watching and reading your build, very nice work. If I may ask, where did you source the c notches from? They are as nice as I have seen on several different project forums.
-
- New Member
- Posts: 50
- Joined: Sun Aug 23, 2015 1:50 pm
- Location: North Atlanta
Re: '69 overhaul- CV, 8.8, and more.
Thx! The c-notches are from eBay, seller dchopshop.Lowell wrote:Enjoy watching and reading your build, very nice work. If I may ask, where did you source the c notches from? They are as nice as I have seen on several different project forums.
-Ryan
1969 F100
1969 F100