#02 - Jan. 22, 2007

How's your Ford truck parts knowledge?
Post Reply
User avatar
FORDification
Site & Forum Admin
Site & Forum Admin
Posts: 8049
Joined: Sun Jul 11, 2004 12:52 am
Location: Kansas, Wellsville
Contact:

#02 - Jan. 22, 2007

Post by FORDification »

Here we go again!

This one is going to be fairly easy, I think. Therefore, each forum member is limited to one guess per day.

This item is on all bumpside and dentside trucks, and AFAIK there is only ONE of these on any truck. Tell me exactly where's it's located and what it's used for:

Image
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
ImageImageImage
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
User avatar
71 LONG BED
100% FORDified!
100% FORDified!
Posts: 1588
Joined: Wed Jun 14, 2006 7:28 am
Location: Hamburg, NJ

re: #02 - Jan. 22, 2007

Post by 71 LONG BED »

It is located on cowl above the firewall and it holds the washer fluid hose.
John Member #1549
71 F100 Sport Custom__________1967 F350 Gone, but not forgotten
Image Image Image
User avatar
Sharkdance
Preferred User
Preferred User
Posts: 488
Joined: Sun Jul 31, 2005 11:33 pm
Location: Florida, Jacksonville

re: #02 - Jan. 22, 2007

Post by Sharkdance »

Its the clip that holds the steel fuel line on the gas tank behind the seat.
Sharkdance
70 F250 2WD 360/C6
Image
User avatar
hoss103
New Member
New Member
Posts: 18
Joined: Tue Mar 07, 2006 1:07 pm
Location: Bonaire, Georgia

re: #02 - Jan. 22, 2007

Post by hoss103 »

My first post! But I think I know it- looks like the rear axle vent tube clip that clips the tube to the frame rail. I have one for my '69, but the tube had rotted away long ago.

(Now I guess I'll have to go introduce myself in the newbie section)
User avatar
71 LONG BED
100% FORDified!
100% FORDified!
Posts: 1588
Joined: Wed Jun 14, 2006 7:28 am
Location: Hamburg, NJ

re: #02 - Jan. 22, 2007

Post by 71 LONG BED »

Oops, I wanted to put another guess and remembered only one per day, shoot.
I think I know what it is now, too! :pout:
John Member #1549
71 F100 Sport Custom__________1967 F350 Gone, but not forgotten
Image Image Image
User avatar
cathynkeith
Preferred User
Preferred User
Posts: 420
Joined: Tue Aug 15, 2006 9:18 pm
Location: Texas, Longview

re: #02 - Jan. 22, 2007

Post by cathynkeith »

located on passenger side, clip holds the pos battery cable.
http://s115.photobucket.com/albums/n292 ... type=local
Life is good...... when nothing is wrong that money can't fix.
1969 f100 flareside
1962 ECONOLINE TRUCK (done)
1975 Nova (almost done)
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Post by fordman »

that looks like the clamp to the frame that holds the speedometer cable to the frame. if i'm wrong it must be a lugnut.
User avatar
theskytoucher
Preferred User
Preferred User
Posts: 471
Joined: Wed Jun 07, 2006 2:53 pm
Location: Arizona, Cottonwood
Contact:

re: #02 - Jan. 22, 2007

Post by theskytoucher »

It the clip that holds the wiring harness to the frame at the rear of the truck just before it branches up to go to the taillights!!!
-Troy-

1996 Dodge ram 1500 4x4
1976 Ford F-150 4x4

Quando Omni Flunkus Mortadi
When all else Fails Play Dead
User avatar
71 LONG BED
100% FORDified!
100% FORDified!
Posts: 1588
Joined: Wed Jun 14, 2006 7:28 am
Location: Hamburg, NJ

re: #02 - Jan. 22, 2007

Post by 71 LONG BED »

Are you sure there is only ONE on every truck? :?
John Member #1549
71 F100 Sport Custom__________1967 F350 Gone, but not forgotten
Image Image Image
User avatar
kknip
Preferred User
Preferred User
Posts: 377
Joined: Tue Aug 15, 2006 5:19 pm
Location: North Carolina, Stanfield

Re: re: #02 - Jan. 22, 2007

Post by kknip »

hoss103 wrote:My first post! But I think I know it- looks like the rear axle vent tube clip that clips the tube to the frame rail. I have one for my '69, but the tube had rotted away long ago.

(Now I guess I'll have to go introduce myself in the newbie section)

That is what I think it is.If you are right hoss103,you have to share half your winnings with me! :lol:

oh yeah,It would go on the second to the last cross member,right over the diff.
Soitenly! Oh,a wiseguy!
You knucklehead!
Image
65 Mustang
72 F250 Camper Special
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Re: re: #02 - Jan. 22, 2007

Post by fordman »

71 LONG BED wrote:Are you sure there is only ONE on every truck? :?
yea i think your right there is more than one of those types of clips on our trucks. this must be a special one. i will tell you tomorrow
User avatar
chips68
New Member
New Member
Posts: 18
Joined: Thu Nov 30, 2006 4:30 pm
Location: Georgia, Chatsworth

re: #02 - Jan. 22, 2007

Post by chips68 »

I agree with sharkdance its the clip that holds the fuel line to the tank
tynall44
Preferred User
Preferred User
Posts: 269
Joined: Sun Jul 24, 2005 11:47 pm
Location: Kentucky

re: #02 - Jan. 22, 2007

Post by tynall44 »

holds a heater control cable :?
User avatar
FORDification
Site & Forum Admin
Site & Forum Admin
Posts: 8049
Joined: Sun Jul 11, 2004 12:52 am
Location: Kansas, Wellsville
Contact:

re: #02 - Jan. 22, 2007

Post by FORDification »

OK, here's the deal:

The clip specifically pictured above was the one mentioned by fordman, as the clip that holds the speedo cable to the frame. However, I also forgot the factory used the same clip on the rear axle tube vent, as mentioned by hoss103.

I checked on the only truck I still have that semi-complete, but there wasn't a similar clip holding the line to the fuel tank inside the cab. I'm not saying there wasn't supposed to be one there...but right now I can't recall one being there. And if there IS supposed to be one there, isn't it dipped in liquid rubber, to act as a vibration dampener? However, even if it wasn't dipped, and is a straight metal clamp, the grease on the one pictured above would be a hint that it wasn't inside the cab. (Yeah, I know, it's a technicality...) ;)

I also believe that any clamp that held wiring, brakeline or fuel line was either plastic or a metal clip dipped in liquid rubber...I don't think they used a straight metal clamp on those items, to minimize chafing.

So as it sits right now, I'm going to call two winners of this one...fordman and hoss103. However, if more than a couple of you can verify that this metal clip (without a rubber insulator) is present on the in-cab fuel line and/or the positive battery cable, then I'll have to divvy this one up among those who answered as such....and I'll have to be a little more aware of what I post in the future! :oops:

Nice job, you all! :thup:
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
ImageImageImage
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
User avatar
rjewkes
100% FORDified!
100% FORDified!
Posts: 3711
Joined: Sun Apr 17, 2005 1:09 am
Location: Missouri, Webb City
Contact:

Post by rjewkes »

I was thinking they used one on the frame to keep the e brake cable from wondering over towards the speedo cable and tranny linkage.
"It is better to keep your mouth shut and appear stupid than to open it and remove all doubt." - Mark Twain
'70 f250 4x4 Crew cab 460/C6 '72 F100 390/C6 9.8 MPG AVG. '89 Mercury Cougar LS Dual Exh. V6 . 18.9 MPG AVG. In Town.
Image
I don't want to give em a heart-attack. That is what would happen if I answered the door in the buff. Heck it almost scares me to death when I step out of the shower and look in the mirror.~Mancar1~
fuelly.com
Post Reply