OT 2002 Ranger exaughst question

Engine, ignition, fuel, cooling, exhaust

Moderators: Ranchero50, DuckRyder

Post Reply
User avatar
OldRedFord
Blue Oval Guru
Blue Oval Guru
Posts: 1314
Joined: Tue Jan 29, 2008 11:37 pm
Location: Hull GA
Contact:

OT 2002 Ranger exaughst question

Post by OldRedFord »

Have a crack in the Y pipe on the Ranger. Its cracked right at one of the oxygen sensors.

Thought it was something else when I had taken the truck to Advance and Auto Zone and couldnt pull up a code. So I took it to the stealer.

I should also point out that my truck has no muffler and just has a turn down behind the cat.

But anywho they said the rattle I have going on is because of not having a muffler and that one of the cats in the Y pipe has a loose chunk inside it.

They said it would be $1700 in parts to fix it all. For right now I am just going to weld up the crack. I also am hoping that will fix the rattle. I think its just loose cause of the cracked pipe.

But the major point of my post is....

Should I weld up that crack before I drive it anymore? I have heard that if the engine is running lean you can burn up the pistons. Is this true?

Kinda need to know tonight so I can decide what I am going to do tomarrow.
Tim

1972 F350 flatbed drw c6/390
1967 F600 project truck
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Re: OT 2002 Ranger exaughst question

Post by fordman »

i/d just weld it up myself. i wouldn't worry about it. i'd weld it up before it got any worse.
Post Reply