scrap metal and recycling

No tech discussion, please

Moderator: FORDification

cep62
100% FORDified!
100% FORDified!
Posts: 2039
Joined: Sun Oct 26, 2008 8:06 pm
Location: West Michigan

Re: scrap metal and recycling

Post by cep62 »

OldRedFord wrote:Past month shredder scrap has gone down almost by half. From $0.10 a lb to $0.06 a lb. :eek:
That's quite a drop but that's still over $130 a gross ton
I've seen it quite a bit lower ,not all that long ago.
Fathersalt
New Member
New Member
Posts: 37
Joined: Sun Apr 11, 2010 9:51 pm
Location: Lubbock, TX

Re: scrap metal and recycling

Post by Fathersalt »

In West TX, I'm getting $190 a ton for short iron 3' and shorter and $120 for long iron like pipe, pieces of tractor plows and such. I just bought a 68' flair side with spare tire dented fender, straight 6, 3 on tree, still runs for $500. Makes handling all the scrap iron worth it. :thup:
User avatar
averagef250
100% FORDified!
100% FORDified!
Posts: 4387
Joined: Fri Mar 17, 2006 12:58 am
Location: Oregon, Beavercreek

Re: scrap metal and recycling

Post by averagef250 »

I used to save scrap and haul it in. I found it's been a better investment to give it to a local scrap hauler. Now I don't have the hassle of storing tons of junk and the scrap guy brings me cool stuff he finds and I can collect on a favor or two from him now and then.

I did clean the shop a short while ago and haul off a small load of #1 prepared iron (engine blocks, big castings, crankshafts, etc. I got nearly $400 for just over a ton and only hauled it 5 miles.
1970 F-250 4x4 original Willock swivel frame chassis '93 5.9 Cummins/Getrag/NP205/HP60/D70
User avatar
FLATBEDFORD
100% FORDified!
100% FORDified!
Posts: 1818
Joined: Sat Feb 18, 2006 1:34 pm
Location: New York, Crugers
Contact:

Re: scrap metal and recycling

Post by FLATBEDFORD »

The more effort you put into sorting and cleaning, the more $$$ you get. Early in '08 scrap was getting good money. I scrapped an '86 F350 that somebody gave me. I brought it in 2 or 3 loads of about $200 each. I also got $650 for a rotted '69 F350 after I pulled everything useful from it. Back then it was $200/ton for car bodies. Last month they were only paying $125 per car.
Steve

1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013

My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
VonsF100
New Member
New Member
Posts: 9
Joined: Fri Apr 16, 2010 3:42 pm

Re: scrap metal and recycling

Post by VonsF100 »

here in Northern MN aluminum cans get nearly $0.40/ lb. unclean (aka bulk aluminum) goes for $0.13 to about $0.25 /lb Copper is around $7.00/lb clean or not. Clean steel at about $0.65/lb and unlcean for a nickel less. Complete cars for crush are goin for $125.00 to about $200.00. Only trouble there is you have to find a scrap collector willing to give you that for them. Most around here won't give even $50.00...or they bill you to even pick it up. Reason it runs like that is due to the high risk of auto theft around these parts, and the scrap yards buy autos by the semi-loads. So you bein joe-shmo with your one or 2 cars is kinda a waste of their time....so they say.
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Re: scrap metal and recycling

Post by fordman »

our junkyards require titels or the car has to be in several pieces before they will take it. it cant be a body. it has to be cut up to be taken without a title.
User avatar
AlleyCat
Blue Oval Guru
Blue Oval Guru
Posts: 1283
Joined: Sat May 12, 2007 8:28 pm
Location: Pennsylvania, Pittsburgh

Re: scrap metal and recycling

Post by AlleyCat »

Scrap prices go up and down like a yo yo. A month ago whole cars were paying $12.50 per hundred. Yesterday it was $8.50 with tin at $7.50. If there are multiple yards close to each other they will sometimes get into price wars. I've hustled scrap since I was a kid. Mostly what I can find or is left from my projects. Cleaning and sorting it is a bit of a hassle but it's worth it to me. :)
Clay

72 F100 4x2 Custom,289, C4 " Slow Ride "
70 F250 4x2 Ranger XLT , 360, C6 "B52 - IV"
96 F150 4x2 XL, 300, E4OD, daily driver

" Professional Wrecker Operators - We Pull for America "
Post Reply