Drivers side wing window for '68 bump

Moderator: FORDification

Post Reply
Ohiotinkerer
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 852
Joined: Wed Nov 09, 2016 5:49 pm
Location: Galion, Ohio

Drivers side wing window for '68 bump

Post by Ohiotinkerer »

Need a driver's side untinted wing window for my bump.........if ft frame needs repainted that's fine as long as the glass is good......I dropped mine while preping it for paint....... :cuss: :cuss:
"Life is a garden - dig it"........... :thup:

1968 F100 2wd - Rangoon Red - 360 w/T18 - power steering and brakes
1997 Honda CBR 900RR
User avatar
thatoneguy
New Member
New Member
Posts: 54
Joined: Fri Aug 09, 2013 2:51 pm
Location: Everett, WA

Re: Drivers side wing window for '68 bump

Post by thatoneguy »

I think I still have a pair from a '70, I would think they will be the same as a '68. Let me know if your interested. Not sure where you are to figure if shipping will be too expensive, I'm up in WA
Aaron V.
1970 Ford F100 4x4 390/4-spd
1973 Ford Maverick 302/C4
1979 Chevrolet C30 Ramp Truck 454/TH-400
1948 Chevrolet 3800 216/4-spd
1995 Jeep Cherokee 4.0/5-spd
2004 Honda Shadow 1100

"While driving yesterday I saw a banana peel in the road and instinctively swerved to avoid it…thanks Mario Kart."
Ohiotinkerer
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 852
Joined: Wed Nov 09, 2016 5:49 pm
Location: Galion, Ohio

Re: Drivers side wing window for '68 bump

Post by Ohiotinkerer »

thatoneguy wrote:I think I still have a pair from a '70, I would think they will be the same as a '68. Let me know if your interested. Not sure where you are to figure if shipping will be too expensive, I'm up in WA
My zip is 44833.....are you wanting to sell them as a pair because all i need is the drivers side glass and frame and don't want to spit a pair unless it doesn't matter to you....... :D
"Life is a garden - dig it"........... :thup:

1968 F100 2wd - Rangoon Red - 360 w/T18 - power steering and brakes
1997 Honda CBR 900RR
User avatar
thatoneguy
New Member
New Member
Posts: 54
Joined: Fri Aug 09, 2013 2:51 pm
Location: Everett, WA

Re: Drivers side wing window for '68 bump

Post by thatoneguy »

Ohiotinkerer wrote:
My zip is 44833.....are you wanting to sell them as a pair because all i need is the drivers side glass and frame and don't want to spit a pair unless it doesn't matter to you....... :D
PM sent!
Aaron V.
1970 Ford F100 4x4 390/4-spd
1973 Ford Maverick 302/C4
1979 Chevrolet C30 Ramp Truck 454/TH-400
1948 Chevrolet 3800 216/4-spd
1995 Jeep Cherokee 4.0/5-spd
2004 Honda Shadow 1100

"While driving yesterday I saw a banana peel in the road and instinctively swerved to avoid it…thanks Mario Kart."
luke-ao
Preferred User
Preferred User
Posts: 383
Joined: Wed Jun 26, 2013 10:58 am
Location: Arizona, In the middle.
Contact:

Re: Drivers side wing window for '68 bump

Post by luke-ao »

I have one if you're still looking.
NWFLF100
New Member
New Member
Posts: 51
Joined: Sat Mar 26, 2016 9:44 pm
Location: NW Florida/ Panama City

Re: Drivers side wing window for '68 bump

Post by NWFLF100 »

I’ve got one from my 69, drivers side, white.
Jaddiethelady
New Member
New Member
Posts: 36
Joined: Mon Oct 09, 2017 1:51 pm
Location: Virginia

Re: Drivers side wing window for '68 bump

Post by Jaddiethelady »

I have a set I took off of my truck. Glass is good. Off of a 67 f100 short bed.
1967 F100 Shortbed
1978 F250 Crew Cab
1979 Bronco Custom
1996 F350 Diesel 4x4
1962 & 65 Econoline Pickup
1988 Ranger
I Love Fords and fur babies.
That about sums it up.
-Jade
User avatar
Ron_Hall
New Member
New Member
Posts: 214
Joined: Sat Oct 22, 2016 2:59 am
Location: Reno, NV

Re: Drivers side wing window for '68 bump

Post by Ron_Hall »

thatoneguy wrote:
Ohiotinkerer wrote:
My zip is 44833.....are you wanting to sell them as a pair because all i need is the drivers side glass and frame and don't want to spit a pair unless it doesn't matter to you....... :D
PM sent!
If he wants just the driver side I'll take the pass side if its in good shape.
Thanks
Ron
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Post Reply