Hello, new guy here . Looking for a 71/72 lower valance. I'm in SW Florida.
Thanks, cdownie3
71/72 Lower Valance
Moderator: FORDification
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: 71/72 Lower Valance
If you don't find it soon make the trip up to"cdownie3"]Hello, new guy here . Looking for a 71/72 lower valance. I'm in SW Florida.
Thanks, cdownie3
the Webster "show/swap meet" almost guaranteed you'll find one there:
http://www.cyclemeet.com/index.php
Or Zephyrhills swap meet:
https://zephyrhillsautoevents.com/swap- ... home-page/
P.S. Make sure you leave your wife at home LOL!
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: 71/72 Lower Valance
Any chance you can post a picture of the part you're looking for?
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: 71/72 Lower Valance
Here is the 70-72 lower valance panel on our bumps, (the green one on the left) the one on the right is from the 67' thru 69' trucks:"luke-ao"Any chance you can post a picture of the part you're looking for?
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
cdownie3
- New Member
- Posts: 4
- Joined: Mon Jul 09, 2018 5:45 am
Re: 71/72 Lower Valance
Yup, the one with the holes is the one I need , The pockets for the turn/park lights is deeper than the early one also.I think.
I could use the fender extensions also, but I think I saw them aftermarket.
Weird thing , I looked at the LMC catalog to make sure the fender extensions are called "fender extensions ", and they have the part I need listed as a stone deflector with years 67-72 being the same part number(part #49-8980).
Am I missing something here? I have an early one,and it sure doesn't look like it will work, I have not had the later part in hand to compare them side by side.
I could use the fender extensions also, but I think I saw them aftermarket.
Weird thing , I looked at the LMC catalog to make sure the fender extensions are called "fender extensions ", and they have the part I need listed as a stone deflector with years 67-72 being the same part number(part #49-8980).
Am I missing something here? I have an early one,and it sure doesn't look like it will work, I have not had the later part in hand to compare them side by side.
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: 71/72 Lower Valance
I still cant tell for sure what you're looking for by that picture. I think this is the part your looking for but I'm not certain.
You do not have the required permissions to view the files attached to this post.
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: 71/72 Lower Valance
and the other side
You do not have the required permissions to view the files attached to this post.
-
cdownie3
- New Member
- Posts: 4
- Joined: Mon Jul 09, 2018 5:45 am
Re: 71/72 Lower Valance
That is it.
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: 71/72 Lower Valance
I kind of thought it was what you wanted but had never herd it call a valance. I'll sell this but I have no idea how to ship it, not sure if UPS will do it. Send me a private message with an offer if you want it.
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: 71/72 Lower Valance
Done deal, should get there in about a week. 
-
cdownie3
- New Member
- Posts: 4
- Joined: Mon Jul 09, 2018 5:45 am
Re: 71/72 Lower Valance
Got the Valance. It's just what we needed, you did a great job on the box. Thanks again for doing this.
-
luke-ao
- Preferred User
- Posts: 383
- Joined: Wed Jun 26, 2013 10:58 am
- Location: Arizona, In the middle.
- Contact:
Re: 71/72 Lower Valance
No worries, glad it got there in one piece..