Steering wheel insert on 72 f250 camper special
Moderator: FORDification
-
Garran1980
- New Member
- Posts: 2
- Joined: Sat Aug 18, 2018 5:27 pm
Steering wheel insert on 72 f250 camper special
I don’t know where the horn ground terminal goes. I touch it to the Colum nut and it allows me to make the horn work so I am sure it attaches there it has a springy wierd terminator on it no where I can see to attach it to the metal parts of the collum
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Steering wheel insert on 72 f250 camper special
"Garran1980"I don’t know where the horn ground terminal goes. I touch it to the Colum nut and it allows me to make the horn work so I am sure it attaches there it has a springy wierd terminator on it no where I can see to attach it to the metal parts of the collum
Make sure the spring loaded horn brush, (under the turn signal switch) is intact. This may help:
http://www.fordification.com/forum/view ... =8&t=49444
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4