67 Father and son project
Moderator: FORDification
-
Stutts115
- New Member
- Posts: 7
- Joined: Wed Mar 13, 2019 8:05 pm
67 Father and son project
[img][/img]We found the truck about a year or so ago in a basement. Where it had sat since 1989. Got it home removed the drivetrain. And cleaned it up a little. Once I figure out how to make pics smaller I'll post some up.
You do not have the required permissions to view the files attached to this post.
Last edited by Stutts115 on Mon Apr 06, 2020 1:49 pm, edited 1 time in total.
-
beejaytx225
- New Member
- Posts: 138
- Joined: Sat Mar 28, 2020 3:39 pm
Re: 67 Father and son project
Absolutely love that this a father son project! I brought my 68 home about 3 weeks ago and my 13yo son was more excited then I was! Keep the trade alive 
1968 F-100 Ranger LB
360 w/C6
Peacock Blue
Family nicknamed her "Bethany"
Central Texas
Past Ford's: 1994 Ranger, 2008 Ranger, 1991 Ranger, 1985 Mustang, 1968 SB Custom Cab F100, 1998 Explorer.
Current Ford's: 2011 Ranger, 2006 Expedition, and of course Bethany
360 w/C6
Peacock Blue
Family nicknamed her "Bethany"
Central Texas
Past Ford's: 1994 Ranger, 2008 Ranger, 1991 Ranger, 1985 Mustang, 1968 SB Custom Cab F100, 1998 Explorer.
Current Ford's: 2011 Ranger, 2006 Expedition, and of course Bethany
-
Stutts115
- New Member
- Posts: 7
- Joined: Wed Mar 13, 2019 8:05 pm
Re: 67 Father and son project
Shortly after this pic. we figured out our old hoist would come up short. I ask him what we could do? He said let’s take parts off the motor:)
You do not have the required permissions to view the files attached to this post.
-
Stutts115
- New Member
- Posts: 7
- Joined: Wed Mar 13, 2019 8:05 pm
Re: 67 Father and son project
On the trailer headed to get the suspension done.
Mustang 2 front end, tubular upper and lower arms, rear axle flip, brand new 9” 35 spline moser axles, wilwood brakes front/rear, fuel tank under bed, engine/trans mount and tilt column.
Mustang 2 front end, tubular upper and lower arms, rear axle flip, brand new 9” 35 spline moser axles, wilwood brakes front/rear, fuel tank under bed, engine/trans mount and tilt column.
You do not have the required permissions to view the files attached to this post.
-
Stutts115
- New Member
- Posts: 7
- Joined: Wed Mar 13, 2019 8:05 pm
Re: 67 Father and son project
Finally got it home, I’ll try and get a few pics of the parts installed.
You do not have the required permissions to view the files attached to this post.
Last edited by Stutts115 on Mon Apr 06, 2020 3:08 pm, edited 2 times in total.
-
Stutts115
- New Member
- Posts: 7
- Joined: Wed Mar 13, 2019 8:05 pm
Re: 67 Father and son project
Finally got it home 
You do not have the required permissions to view the files attached to this post.
-
hdman90
- Preferred User
- Posts: 382
- Joined: Thu Mar 19, 2015 8:34 am
- Location: Erie, Pa
- Contact:
Re: 67 Father and son project
Absolutely awesome. To have your kids involved is the way to go! After all, I'm sure that's why over half of us are into these trucks in the first place!
1969 F-100 LWB 2wd 240 3spd manual
1969 F-250 LWB 4wd 360 4spd manual
1976 F-250 Supercab LWB 2wd 390 4spd manual
1969 F-250 LWB 4wd 360 4spd manual
1976 F-250 Supercab LWB 2wd 390 4spd manual
-
hfdco4
- Blue Oval Guru
- Posts: 1289
- Joined: Mon Apr 01, 2013 1:45 pm
Re: 67 Father and son project
Great family project.
Paul
FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
FE390PC1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs