Floor shifter help

Clutch, transmission, rear axle

Moderators: FORDification, 70_F100

Post Reply
gonzalo medina
Preferred User
Preferred User
Posts: 323
Joined: Tue Oct 11, 2005 5:53 pm
Location: California, Fresno

Floor shifter help

Post by gonzalo medina »

Could anyone identify the floor shifter RANDY BECK is using. I want that same style. I just put in my bucket seats and new carpet.
cdeal28078
100% FORDified!
100% FORDified!
Posts: 1982
Joined: Mon Aug 15, 2005 8:45 am
Location: North Carolina, Huntersville

re: Floor shifter help

Post by cdeal28078 »

I think he is using a B&M Negashifter but not sure. He is in our NC club so I will relay your question to him'clint
71 F100 SportCustom
460 C6. Disc Brake/Power-steering/automatic Swap. 3.00
1986 Bronco 5.0 AOD
User avatar
Randy Beck
New Member
New Member
Posts: 90
Joined: Tue Feb 07, 2006 1:28 pm
Location: North Carolina, Lexington

re: Floor shifter help

Post by Randy Beck »

I have the B&M light truck Megashifter, Summit part #BMM-80680.
1969 F-100 Ranger
351W/TCI Streetfighter C6-2800 stall coverter
Proline 180 heads
TorkerII intake/780 Holley
Sanderson headers/Flowmaster mufflers
Best 1/8th mile E/T 8.55
Best 1/8th mile MPH 85.024
User avatar
Randy Beck
New Member
New Member
Posts: 90
Joined: Tue Feb 07, 2006 1:28 pm
Location: North Carolina, Lexington

re: Floor shifter help

Post by Randy Beck »

I have the B&M light truck Megashifter, Summit part #BMM-80680.

http://photobucket.com/albums/a197/rkbe ... C00644.jpg
1969 F-100 Ranger
351W/TCI Streetfighter C6-2800 stall coverter
Proline 180 heads
TorkerII intake/780 Holley
Sanderson headers/Flowmaster mufflers
Best 1/8th mile E/T 8.55
Best 1/8th mile MPH 85.024
gonzalo medina
Preferred User
Preferred User
Posts: 323
Joined: Tue Oct 11, 2005 5:53 pm
Location: California, Fresno

re: Floor shifter help

Post by gonzalo medina »

Thanks what else is needed I have a 390 with c6.
User avatar
Randy Beck
New Member
New Member
Posts: 90
Joined: Tue Feb 07, 2006 1:28 pm
Location: North Carolina, Lexington

re: Floor shifter help

Post by Randy Beck »

The shifter comes with several different brackets to use with different trannys. Also comes with cable and mounting hardware. This is one tough shifter!! If you want to slam some gears, this shifter is the stuff!!
1969 F-100 Ranger
351W/TCI Streetfighter C6-2800 stall coverter
Proline 180 heads
TorkerII intake/780 Holley
Sanderson headers/Flowmaster mufflers
Best 1/8th mile E/T 8.55
Best 1/8th mile MPH 85.024
gonzalo medina
Preferred User
Preferred User
Posts: 323
Joined: Tue Oct 11, 2005 5:53 pm
Location: California, Fresno

re: Floor shifter help

Post by gonzalo medina »

Thanks: folks like you keep me glued to this forum. Anything else I may need that isn't included. I will order mine today. Giving my interior a full make over thanks.....
User avatar
flyboy2610
100% FORDified!
100% FORDified!
Posts: 4901
Joined: Sun Oct 03, 2004 6:42 pm
Location: Nebraska, Lincoln

re: Floor shifter help

Post by flyboy2610 »

I hate to tell you this, Randy, but.........
someone stole your carpet! :evil:
"If the women don't find you handsome, they should at least find you handy."
Red Green

If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
cdeal28078
100% FORDified!
100% FORDified!
Posts: 1982
Joined: Mon Aug 15, 2005 8:45 am
Location: North Carolina, Huntersville

re: Floor shifter help

Post by cdeal28078 »

Someone stole half his seat also. lol Randy's truck went on the Moorsville NC Dragstrip Diet. That is one fast truck.
I have seen him race several times and it is so funny when he lines up against a car that has alot of people in the stands cheering for him. Randy pulls up to the water box in his F100 and people in the crowd would be hollering "take that farm truck back home" and stuff like that. It is so funny when he spanks the cars butt and all those people in the stands have to eat a little crow.
clint
71 F100 SportCustom
460 C6. Disc Brake/Power-steering/automatic Swap. 3.00
1986 Bronco 5.0 AOD
User avatar
Randy Beck
New Member
New Member
Posts: 90
Joined: Tue Feb 07, 2006 1:28 pm
Location: North Carolina, Lexington

Re: re: Floor shifter help

Post by Randy Beck »

flyboy2610 wrote:I hate to tell you this, Randy, but.........
someone stole your carpet! :evil:
Yea, the junk yard stole the carpet!! lol The carpet that was in there was pretty rotten on the passenger side and torn on the drivers side. The floor under the carpet had alot of surface rust, so I clean it up and repainted the floors. Like Mr Deal said, I put the truck on a drag strip diet. I removed the rotten carpet (60+ lbs) and the bench seat, as well as the radio, speaker, and heater box. This dropped the weight of the truck by at least 250lbs. I haven't taken it to the track yet this year to see if the diet improves my E/T. It won't be long, I'll have it back on the strip!!
1969 F-100 Ranger
351W/TCI Streetfighter C6-2800 stall coverter
Proline 180 heads
TorkerII intake/780 Holley
Sanderson headers/Flowmaster mufflers
Best 1/8th mile E/T 8.55
Best 1/8th mile MPH 85.024
Post Reply