Measurements for 302 engine perches.
Moderators: Ranchero50, DuckRyder
-
modrisco
- New Member
- Posts: 19
- Joined: Sat Jan 29, 2011 11:47 am
Measurements for 302 engine perches.
I need center to center distance on the holes the motor mounts bolt to on 302 engine perches when they are bolted in truck, as well as height difference drivers side to pass side. I am fabbing engine mounts for a 302 in a truck with a Crown Vic front end. Thanks.
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Measurements for 302 engine perches.
Somewherre here there's the "builders layout/measurments" but i can never find it.
Maybe by bumping your post back to the top Randy or someone else who knows where it's "hidden" can help!
Maybe by bumping your post back to the top Randy or someone else who knows where it's "hidden" can help!
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Measurements for 302 engine perches.
Unfortunately, the builder's layout pages do not have the perches shown, probably due to the different perch variations.
http://www.fordification.com/tech/bodybuilder70.htm
There's also a tech article showing the different perches and their mounting locations but no dimensions there either.
http://www.fordification.com/tech/engine-perches.htm
http://www.fordification.com/tech/bodybuilder70.htm
There's also a tech article showing the different perches and their mounting locations but no dimensions there either.
http://www.fordification.com/tech/engine-perches.htm
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.