My first truck.

No tech discussion, please

Moderator: FORDification

Post Reply
User avatar
Fordkid68
Preferred User
Preferred User
Posts: 308
Joined: Fri Oct 16, 2020 7:27 pm
Location: Conneaut Lake, PA.

My first truck.

Post by Fordkid68 »

IMG_1484.JPG
Hello, I just recently purchased my first truck, that I hope to restore before I get my license. It has a 360, and an FMX trans, but I am putting in a 351W, and toploader 4-speed. It will be my daily driver. When I got it the cab had already been painted but the bad had not, although I am planning a color change anyway. It was originally from CA so it is very solid. Which is unusual to find here in NWPA. Here is a pic of the the progress so far...
IMG_6949.JPG
I removed the 360, and front clip, and started to patch the floors, and radiator support. It has been a fun project so far!
You do not have the required permissions to view the files attached to this post.
Adam

My first truck,
1968 F100 lwb 2wd soon to have a 351w, 5-speed
http://www.fordification.com/forum/view ... 15#p771357
^^Build Thread^^
04 Subaru Outback (daily driver), with a 2.5l boxer H4
(no other projects, YET!)
"Might be crazy but I ain't dumb"!
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: My first truck.

Post by basketcase0302 »

:wel:

Good start and congrats on the score of the decent body! :woohoo:

The parts for the Z-bar might be the hardest "obstacle" you'll have to overcome, (obselete parts no longer made). If you don't have those lined up already I'd suggest maybe posting a "wanted" ad here on the forum under the "parts" section, (as I'd bet big bucks a member here has done just the opposite and changed from manual to automatic as i did years ago) and prob has the parts you'll need for this laying around. :thup:
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
User avatar
Fordkid68
Preferred User
Preferred User
Posts: 308
Joined: Fri Oct 16, 2020 7:27 pm
Location: Conneaut Lake, PA.

Re: My first truck.

Post by Fordkid68 »

Thanks for the tip basketcase0302! Do you still have clutch/brake pedals from your swap that you would be willing to sell?
Adam

My first truck,
1968 F100 lwb 2wd soon to have a 351w, 5-speed
http://www.fordification.com/forum/view ... 15#p771357
^^Build Thread^^
04 Subaru Outback (daily driver), with a 2.5l boxer H4
(no other projects, YET!)
"Might be crazy but I ain't dumb"!
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: My first truck.

Post by basketcase0302 »

"Fordkid68"Thanks for the tip basketcase0302! Do you still have clutch/brake pedals from your swap that you would be willing to sell?
Sorry long since sold, but know there are many here who would prob have them! :pray:
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
bellamor
New Member
New Member
Posts: 67
Joined: Fri Oct 12, 2018 1:32 am
Location: Vancouver

Re: My first truck.

Post by bellamor »

The color looks nice, good luck modifying it.
DrakenJ35
New Member
New Member
Posts: 9
Joined: Wed Oct 28, 2020 12:43 pm

Re: My first truck.

Post by DrakenJ35 »

This is a gorgeous truck, I'll be following your progress with it!
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: My first truck.

Post by basketcase0302 »

Not sure, (and he isn't either) if it came from a bump era.
https://www.ebay.com/itm/1967-1972-Ford ... Swg8hdsD8J

There seem to be several from the dent era for sale on fleabay. Maybe try to match up a part number from the dent era to see if the one above is from a bump or dent? :hmm:

https://www.ebay.com/sch/i.html?_from=R ... &_osacat=0
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
User avatar
Fordkid68
Preferred User
Preferred User
Posts: 308
Joined: Fri Oct 16, 2020 7:27 pm
Location: Conneaut Lake, PA.

Re: My first truck.

Post by Fordkid68 »

Thanks for the links Jeff! But I already found pedals. I bought them from hdman90. Thanks anyway.
Adam

My first truck,
1968 F100 lwb 2wd soon to have a 351w, 5-speed
http://www.fordification.com/forum/view ... 15#p771357
^^Build Thread^^
04 Subaru Outback (daily driver), with a 2.5l boxer H4
(no other projects, YET!)
"Might be crazy but I ain't dumb"!
Post Reply