Factory Console
Moderator: FORDification
-
- New Member
- Posts: 8
- Joined: Sun Aug 16, 2009 3:57 pm
Factory Console
I want to install bucket seats in my 1968 F-100. However, that is going to leave a bit of an empty spot in the cab. I figure on installing a center console. Have any of you installed a factory console out of a Mustang or other Ford car? If so can you post pictures?
- FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
Re: Factory Console
Those would be way to low to be useable. I'd suggest getting one from a '78-'79 Bronco or an '80s F-series. Here's a shot of the interior of my '75 with '87 Ranger XLT buckets and console. The Bronco uses the same console.

You'll just have to come up with a way of mounting it to the floorpan, since the bottom of the console isn't flat:

You can also use the center console from a full-size '80s Ramcharger. They look a lot like the Ford piece. Here's a listing for one on E-bay right now, for the visual:
http://cgi.ebay.com/ebaymotors/Vintage- ... 588f692af9

(Don't suppose you have a blue interior, do you? I have one of these consoles in blue that I was gonna E-bay.)

You'll just have to come up with a way of mounting it to the floorpan, since the bottom of the console isn't flat:

You can also use the center console from a full-size '80s Ramcharger. They look a lot like the Ford piece. Here's a listing for one on E-bay right now, for the visual:
http://cgi.ebay.com/ebaymotors/Vintage- ... 588f692af9
(Don't suppose you have a blue interior, do you? I have one of these consoles in blue that I was gonna E-bay.)

____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special



My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special



My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-
- Blue Oval Guru
- Posts: 1257
- Joined: Sat Jan 08, 2011 6:45 pm
- Location: Comox Valley B.C. Canada
Re: Factory Console
i've got a console from a mid 70's gmc jimmy in my truck,the bottom is alot flatter than the 80's ford one i tried out before which will make bolting it down eventually alot easier

it was originally blue and whoever owned the jimmy i got it out of hit it with a black spraybomb (the black is peeling off and is on the 'to-do' list as well)



it was originally blue and whoever owned the jimmy i got it out of hit it with a black spraybomb (the black is peeling off and is on the 'to-do' list as well)


- still got my first first car 20+yrs later : 69 f100 sorta kinda pretending its a Mercury M100 w/a 70 f350 sport custom cab (factory buckets) 67 grille with 69 ranger cooneyes 68 merc box and hood,some supercool fiberglass fenders i scored way back when, 76 f150 disc brake frontend..currently running a 90 5.0HO 4bbl/c4 auto & 3.50 posi...originally a 360/c6 f100 Ranger with dealer added towpack (incl. kelsey hays trailer brake),boxside toolbox,behind the seat stowage & belly tank...only original parts left on 'er are the frame,rear end,rear springs,and rear bumper...