70 styleside glove box emblem

Inside the cab...appearance, repair, upgrades

Moderator: FORDification

Post Reply
70-360fe
New Member
New Member
Posts: 49
Joined: Mon Feb 06, 2012 6:44 am

70 styleside glove box emblem

Post by 70-360fe »

What emblem came on a 1970 styleside glove box door and what other year emblem will fit. Thanks!
User avatar
evan_flatt69
Blue Oval Fan
Blue Oval Fan
Posts: 513
Joined: Mon Mar 21, 2011 7:53 pm
Location: Portland, Tennessee

Re: 70 styleside glove box emblem

Post by evan_flatt69 »

I think they only had emblems if it was a sport custom, ranger, or camper special.
1969 F-100 Short Bed Custom Cab 390
1985 BMW 635CSi
User avatar
sargentrs
100% FORDified!
100% FORDified!
Posts: 9866
Joined: Fri Jun 22, 2007 9:30 am
Location: Georgia, Jasper

Re: 70 styleside glove box emblem

Post by sargentrs »

Mine has the Sport Custom badge on it.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
Whateverman
Blue Oval Guru
Blue Oval Guru
Posts: 1257
Joined: Sat Jan 08, 2011 6:45 pm
Location: Comox Valley B.C. Canada

Re: 70 styleside glove box emblem

Post by Whateverman »

they're all held on with 2 nuts,you can put whatever you want there 'ranger'' sport custom' etc. the badges are all the same size
- still got my first first car 20+yrs later : 69 f100 sorta kinda pretending its a Mercury M100 w/a 70 f350 sport custom cab (factory buckets) 67 grille with 69 ranger cooneyes 68 merc box and hood,some supercool fiberglass fenders i scored way back when, 76 f150 disc brake frontend..currently running a 90 5.0HO 4bbl/c4 auto & 3.50 posi...originally a 360/c6 f100 Ranger with dealer added towpack (incl. kelsey hays trailer brake),boxside toolbox,behind the seat stowage & belly tank...only original parts left on 'er are the frame,rear end,rear springs,and rear bumper...
70-360fe
New Member
New Member
Posts: 49
Joined: Mon Feb 06, 2012 6:44 am

Re: 70 styleside glove box emblem

Post by 70-360fe »

The reason I ask is I finally ran my vin and found out I have a styleside. Originally I thought I had an xlt from phamlets I looked at but vin indictes styleside. I have three holes in glove door from passenger side door to drivers door. From the first hole 2nd is 2.5 inches the third hole is 5.5 from first. Where the 2nd hole is on the back of glove box door there is sticker so I don't know if it goes all the way thur door like other 2.
From paint fade I can tell original emblem was 6 inches long.( hope this makes sence)

Anyway I'm getting close to working on interior and wanted to get/look for the correct emblem, thanks.

Here is a link of why I though I had an xlt, my interior is the same except no glove box emblem and I don't have the vinyl wood grain looking piece under glove box. Oh yea looking at the red interior.

http://www.oldcarbrochures.com/static/N ... up-05.html

One other thing is on the rear bed I have a emblem that only says ranger, thanks.
User avatar
71PA_Highboy
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 923
Joined: Tue May 23, 2006 11:32 am
Location: Denver of the East

Re: 70 styleside glove box emblem

Post by 71PA_Highboy »

Styleside is a bed type designation and has nothing to do with trim codes (XLT).

As you can see in this pic:
http://www.fordification.com/library/ma ... temId=1847

If you had an XLT, the bed side woudl have said 'Ranger XLT'

Sounds like you have a Ranger trim package.

EDIT:
If you want a RangerXLT emblem:
http://www.ebay.com/itm/150848646381
Got Ford?
2 EarlyBroncos (68,69)
2 Classic Mustangs (69,70)
1 F250 4x4 (71) - OB - 360, NP435, D24, HPD60 4.10, D60,
1 94 Ranger, 2.3, 5spd
1 Lincoln Mark VIII
70-360fe
New Member
New Member
Posts: 49
Joined: Mon Feb 06, 2012 6:44 am

Re: 70 styleside glove box emblem

Post by 70-360fe »

71PA_Highboy wrote:Styleside is a bed type designation and has nothing to do with trim codes (XLT).

As you can see in this pic:
http://www.fordification.com/library/ma ... temId=1847

If you had an XLT, the bed side woudl have said 'Ranger XLT'

Sounds like you have a Ranger trim package.

EDIT:
If you want a RangerXLT emblem:
http://www.ebay.com/itm/150848646381
Thanks for the help, looks like I have a ranger trim package. I will have to do some more research on the styleside.
Post Reply