Project 'Smokey' - '72 Ranger XLT

Post progress reports on your project truck(s)

Moderator: FORDification

Post Reply
User avatar
Bullitt74
Preferred User
Preferred User
Posts: 430
Joined: Thu Sep 22, 2016 5:34 pm
Location: Red Deer, Alberta, Canada

Re: Project 'Smokey' - '72 Ranger XLT

Post by Bullitt74 »

More shots of the cab after cut and polish. A really "holy crap, this thing is coming together" moment...

Image

Image

Image
Ken looking on in the background...

Image

Image
Box is getting the 2-tone treatment

Image
A few rusty owies had to be fixed in the box before application of the Raptor Liner

Image
Love the '54 Chev in the background on these pics. An older LT1 Corvette engine to power it if you're wondering

Image
This is my favourite pic from this set

Image
Steve F.
Red Deer, Alberta, Canada
'72 Ranger XLT, 4x2, 390-2V, C6, Wind blue & Wimbledon White (‘Smokey’)
8)
2016 F150 Lariat FX4 Supercrew, Ruby Red
Follow my build thread for 'Smokey': http://fordification.com/forum/viewtopi ... 22&t=85070
User avatar
cdnwillyg
Preferred User
Preferred User
Posts: 364
Joined: Sun Oct 29, 2017 7:17 pm
Location: Alberta, Canada

Re: Project 'Smokey' - '72 Ranger XLT

Post by cdnwillyg »

Wow that's a lot of work done and looking great!
Good call on doing the frame just makes it look right, nice and clean.
Keep it up!
1968 Mercury M250 Camper Special
FE-390,570CFM 4bbl, C6 Automatic, PS, PB front disk.
Stony Plain, Alberta, Canada
:drive:Willy
User avatar
cdnwillyg
Preferred User
Preferred User
Posts: 364
Joined: Sun Oct 29, 2017 7:17 pm
Location: Alberta, Canada

Re: Project 'Smokey' - '72 Ranger XLT

Post by cdnwillyg »

Steve just noticed on the last pic that the bottom of the box at the back will be the same color as the top/inside..right? I think you should look at doing the back piece the same color as the lower outside of the box or it will look funny once the bumper is on with the tailgate. :2cents: Your truck do it the way you want., just wanted to make sure you were aware of this.
:thup:
1968 Mercury M250 Camper Special
FE-390,570CFM 4bbl, C6 Automatic, PS, PB front disk.
Stony Plain, Alberta, Canada
:drive:Willy
User avatar
Bullitt74
Preferred User
Preferred User
Posts: 430
Joined: Thu Sep 22, 2016 5:34 pm
Location: Red Deer, Alberta, Canada

Re: Project 'Smokey' - '72 Ranger XLT

Post by Bullitt74 »

Okay guys, here's some of the pics you've been waiting for with (almost) the complete body put together and painted. These were taken just before Christmas and today.

Image

Image

Image

Image

Image
Raptor liner applied in this shot

Image
My favourite pic from this set. I love the drip rail trim and original gas cap (I scrounged for months to find an original gas cap BTW). A taste of what it'll look like once it receives it's chrome treatment.

Image

Image

Image

Image

Image
This last one of the tailgate receiving 2-tone treatment was taken today.

...and that's the catch-up on the paint and body. Thanks to Lone Ranger and others for pushing me to keep up with this thread!
Steve F.
Red Deer, Alberta, Canada
'72 Ranger XLT, 4x2, 390-2V, C6, Wind blue & Wimbledon White (‘Smokey’)
8)
2016 F150 Lariat FX4 Supercrew, Ruby Red
Follow my build thread for 'Smokey': http://fordification.com/forum/viewtopi ... 22&t=85070
User avatar
Bullitt74
Preferred User
Preferred User
Posts: 430
Joined: Thu Sep 22, 2016 5:34 pm
Location: Red Deer, Alberta, Canada

Re: Project 'Smokey' - '72 Ranger XLT

Post by Bullitt74 »

cdnwillyg wrote:Steve just noticed on the last pic that the bottom of the box at the back will be the same color as the top/inside..right? I think you should look at doing the back piece the same color as the lower outside of the box or it will look funny once the bumper is on with the tailgate. :2cents: Your truck do it the way you want., just wanted to make sure you were aware of this.
:thup:
Thanks for noticing that - the 2-tone on the back won't be quite right - unfortunately I didn't catch it until recently. I'm not too worried, as the XLT panel and the trim around the taillights will mask much of that. I'm not too fussy on this aspect, and Ken has already gone above and beyond on this project! :D
Steve F.
Red Deer, Alberta, Canada
'72 Ranger XLT, 4x2, 390-2V, C6, Wind blue & Wimbledon White (‘Smokey’)
8)
2016 F150 Lariat FX4 Supercrew, Ruby Red
Follow my build thread for 'Smokey': http://fordification.com/forum/viewtopi ... 22&t=85070
User avatar
cdnwillyg
Preferred User
Preferred User
Posts: 364
Joined: Sun Oct 29, 2017 7:17 pm
Location: Alberta, Canada

Re: Project 'Smokey' - '72 Ranger XLT

Post by cdnwillyg »

It sure looks great all done. :thup: :thup: Your Raptor liner, how did you get it to color match the paint? I would like to do that in my bed but didn't think the color could be matched? :?
1968 Mercury M250 Camper Special
FE-390,570CFM 4bbl, C6 Automatic, PS, PB front disk.
Stony Plain, Alberta, Canada
:drive:Willy
User avatar
Bullitt74
Preferred User
Preferred User
Posts: 430
Joined: Thu Sep 22, 2016 5:34 pm
Location: Red Deer, Alberta, Canada

Re: Project 'Smokey' - '72 Ranger XLT

Post by Bullitt74 »

cdnwillyg wrote:It sure looks great all done. :thup: :thup: Your Raptor liner, how did you get it to color match the paint? I would like to do that in my bed but didn't think the color could be matched? :?
Hey Willy - I did a fair bit of research on this a while back. My memory is a bit hazy on this, so anyone else reading this feel free to chime in or correct me if needed.

The coloured/tinted (other than black) Line-X product uses a type of basecoat/topcoat, which is fine until it gets scratched, which can't really be matched. Also, the basecoat has a tendency to turn yellow (lighter colors) or fade if the topcoat gets scratched. In addition, the lighter colors in the Line-X product will eventually yellow over time.

The U-Pol Raptor liner has UV protectant. There are threads on the 4x4 forums where guys in Texas have installed this product with no fading or yellowing after 3-5 years (some of these guys paint their entire 4x4 with the product). You probably have shops closer to you that can mix it, but I highly recommend CAPS in Red Deer, as they are experts in color matching - especially if you can bring in a painted piece that they can match up. Just know that the product is textured and matte finish, so the color match won't be perfect...although I think even close looks better to me that flat black on these trucks (particularly with a white/colour combo).

http://www.raptorcoatings.com/us/en/home

The other advantage is that it covers up small imperfections in the box, which have a tendency to accumulate in trucks like ours...
Steve F.
Red Deer, Alberta, Canada
'72 Ranger XLT, 4x2, 390-2V, C6, Wind blue & Wimbledon White (‘Smokey’)
8)
2016 F150 Lariat FX4 Supercrew, Ruby Red
Follow my build thread for 'Smokey': http://fordification.com/forum/viewtopi ... 22&t=85070
User avatar
popeyes71
Blue Oval Guru
Blue Oval Guru
Posts: 1176
Joined: Tue Jan 31, 2012 3:46 pm
Location: Bay Area, Ca.

Re: Project 'Smokey' - '72 Ranger XLT

Post by popeyes71 »

Great Progress! Love how you did the bed liner and how it is not your standard black. She looks really nice but wait till you get her out of the shop and out of the florescent lights and into the sun light; she is going to look amazing in natural light! Keep us up to date on the progress!
-Popeye-
1971 F-250 4x4 Highboy
1966 Chevy Nova, 8 second 10.5 car
User avatar
Manny
Blue Oval Guru
Blue Oval Guru
Posts: 1190
Joined: Wed Oct 04, 2006 7:15 pm
Location: Georgia, Lake City
Contact:

Re: Project 'Smokey' - '72 Ranger XLT

Post by Manny »

That thing looks fantastic. Second vote for love tinted raptor liner works out great. Man that thing looks amazing!!! Keep us updated the blue a white is great! :thup: :eek:
Just another Ford fool named Dan.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
woods wrote: The rust holes in my truck were a factory install (very rare).
User avatar
DuckRyder
Moderator
Moderator
Posts: 4924
Joined: Mon Jul 19, 2004 3:04 pm
Location: Scruffy City
Contact:

Re: Project 'Smokey' - '72 Ranger XLT

Post by DuckRyder »

Wow, That is looking good!!!

Can’t wait to see the finished product!
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)

"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
User avatar
67mann
100% FORDified!
100% FORDified!
Posts: 1705
Joined: Thu Feb 07, 2008 7:19 am
Location: NY..Mt.Morris 3rdgen. homestead

Re: Project 'Smokey' - '72 Ranger XLT

Post by 67mann »

:yt: Nice job :thup:
I've had enough and I'm not alone
http://s267.photobucket.com/albums/ii304/67mann/
User avatar
hfdco4
Blue Oval Guru
Blue Oval Guru
Posts: 1311
Joined: Mon Apr 01, 2013 1:45 pm

Re: Project 'Smokey' - '72 Ranger XLT

Post by hfdco4 »

I wish I was closer to this stage. You have an amazing looking ride there. :woohoo: :woohoo: :woohoo: :woohoo: :woohoo: :woohoo:
Paul
:fr: FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
Lone Ranger
Blue Oval Fan
Blue Oval Fan
Posts: 663
Joined: Tue Jun 21, 2016 2:27 pm
Location: Northern Michigan

Re: Project 'Smokey' - '72 Ranger XLT

Post by Lone Ranger »

Wow! Steve your truck looks beautiful! It's gonna really pop once all that trim and chrome is on. Can't wait to see it out in the light...to bad the weather isn't cooperating. Keep up the good work!
1972 f100 4x4 4 inch lift with dump box kit-sold
1969 f250 4x4 highboy in progress.
http://www.fordification.com/forum/view ... 22&t=85251
Kyle
crazyhorse
100% FORDified!
100% FORDified!
Posts: 1514
Joined: Sun Jan 27, 2008 9:24 pm

Re: Project 'Smokey' - '72 Ranger XLT

Post by crazyhorse »

Mr Bullitt, :yt:

Congratulations.
Looking good. :fr:
User avatar
Bullitt74
Preferred User
Preferred User
Posts: 430
Joined: Thu Sep 22, 2016 5:34 pm
Location: Red Deer, Alberta, Canada

Re: Project 'Smokey' - '72 Ranger XLT

Post by Bullitt74 »

Thanks everyone for your kind words and support! The encouragement will certainly help once I'm at the point where I've put the kids to bed after a long day at work, and only have 1-2 hours to chip away at this project. My goal is to have it ready (driving, tested and tuned) for a huge car show in Three Hills, Alberta for the first weekend in June (in addition to many trips to Home Depot for more backyard projects - this truck will have to do some work too). :D

I wasn't there, but last year there was a bit of a scare with a tornado that threatened the Three Hills car show events on the Friday night. This gained some international attention when a local resident decided to finish cutting his grass with the tornado looming in the background.
http://www.cbc.ca/news/canada/calgary/t ... -1.4145466

Might be able to take delivery as soon as next week (fingers crossed!). It's first stop will be to get some new glass as the first step towards weatherproofing the cab interior. Unfortunately, my daily driver gets priority when the weather is real nasty (like what we've had lately). Hoping for a mild Alberta winter from this point forward with an early spring... :pray:
Steve F.
Red Deer, Alberta, Canada
'72 Ranger XLT, 4x2, 390-2V, C6, Wind blue & Wimbledon White (‘Smokey’)
8)
2016 F150 Lariat FX4 Supercrew, Ruby Red
Follow my build thread for 'Smokey': http://fordification.com/forum/viewtopi ... 22&t=85070
Post Reply